RIFF JTAG - Samsung T749, Samsung E189 Unbrick - Boot repair supported

12.07.2011 Samsung T749, Samsung E189 Unbrick â€" Boot bushel supported


The Samsung T749 commission is machine supercharged on with USB Data Cable adjoining to the PC. Battery proximity is not required; connection crapper be established with semidetached board.

To resuscitate Samsung T749:

• Solder JTAG telegram to Samsung T749 JTAG pads;
• Connect USB cable;
• Make sure Samsung T749 is selected in the itemize of models;
• Click Resurrect button;
• Wait dirt code signals a flourishing activeness completion;
• Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you crapper flash it using famous experience methods.
In case you cannot encounter code files ingest Global RIFF Link & Data Exchange plugin â€" at the time of resurrector release there was shared full shitting from aware Samsung T749 phone.

To enter download mode:

• Disconnect PC cable;
• Insert battery;
• Hold both ‘Volume Up’ and ‘Camera’ keys and advise ‘Power ON’ button.

Resurrecting Samsung E189 is simple.

Phone is machine supercharged on with USB Cable adjoining to the PC. Battery proximity is not required; connection crapper be established with semidetached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x00EC/0×2256

To resuscitate Samsung E189:

• Solder JTAG telegram to Samsung E189 JTAG pads;
• Insert USB Data telegram into commission and PC;
• Make sure Samsung E189 is selected in the itemize of models;
• Click Resurrect button;
• Choose which areas to flash;
• Wait dirt code signals a flourishing activeness completion;
• De-solder JTAG wires;

Please utter “Check For Updates” button in order to download and administer new files. Closing all streaming application before starting update process is recommended.

RIFF Box – JTAG Revolution