RSS Feed
Twitter
20:30
FlasherBoxNews
WHATS NEW!!!
- HTC Desire HD A9191 (HTC Ace) = Unbrick, IMEI, CID, ModelID, Simlock bushel = WORLD FIRST ! ! !
http://forum.gsmhosting.com/vbb/f634...epair-1289758/
Firmware 1.25
---------------------------
- additional 5.0V USB Power On/Off controlling feature
- denaturized sequence for 32-bit indite accesses for ARM11 ordered (MSM8xxx support)
JTAG Manager 1.33
---------------------------
- Improved unification policy:
Resurrection/DCC unification to figure is implemented in much way that JTAG pace changes have 2 stages - booting initiate and employed stage.
Booting initiate is the digit from the unification start and until the DCC Loader upload is complete. Booting TCK/RTCK pace are setup
by JTAG Manager no matter what are the TCK settings by individual (JTAG TCK Speed earth in the JTAG Manager). Booting pace is hardcoded in the DLL.
After "booting" initiate is complete, the "working" pace is ordered - the digit which is selected by individual in the JTAG TCK Speed field.
If Booting Speed in resurrector DLL is hardcoded as 'RTCK' the JTAG Manager would ever ingest RTCK fashion during booting stage.
Now contract is denaturized that is when individual selects a immobile TCK frequency the JTAG Manager module automatically
change booting pace to the immobile TCK too.
- immobile bug: if "Use End Address" and "AutoFull Flash Size" were checked there was error setting legal size to read.
- for Advanced Users: modern settings are today moved from the DCC Read/Write tender ("Notifications...") into removed fix on Box Service tender (Advanced Settings button)
- additional 5.0V USB Power On/Off controlling feature
For this go to Box Service page, utter Advanced Settings: the Notifications talking module be displayed,
go to "Advanced Settings" tender and ordered desirable fashion for "Enable 5.0V output" checkbox.
When enabled, 5.0V noesis module be on after some "JTAG" activeness executed and module rest "ON" until
box restart or until "Enable 5.0V output" checkbox is unchecked and some "JTAG" activeness is executed.
- additional improvement for experience module devices which are sector-based (like MDOC H3 or MMC/SD module cards)
- if error code 0x3C (write-protect) is conventional no recover attempts are made.
RIFF Box â€" JTAG Revolution
.
- HTC Desire HD A9191 (HTC Ace) = Unbrick, IMEI, CID, ModelID, Simlock bushel = WORLD FIRST ! ! !
http://forum.gsmhosting.com/vbb/f634...epair-1289758/
Firmware 1.25
---------------------------
- additional 5.0V USB Power On/Off controlling feature
- denaturized sequence for 32-bit indite accesses for ARM11 ordered (MSM8xxx support)
JTAG Manager 1.33
---------------------------
- Improved unification policy:
Resurrection/DCC unification to figure is implemented in much way that JTAG pace changes have 2 stages - booting initiate and employed stage.
Booting initiate is the digit from the unification start and until the DCC Loader upload is complete. Booting TCK/RTCK pace are setup
by JTAG Manager no matter what are the TCK settings by individual (JTAG TCK Speed earth in the JTAG Manager). Booting pace is hardcoded in the DLL.
After "booting" initiate is complete, the "working" pace is ordered - the digit which is selected by individual in the JTAG TCK Speed field.
If Booting Speed in resurrector DLL is hardcoded as 'RTCK' the JTAG Manager would ever ingest RTCK fashion during booting stage.
Now contract is denaturized that is when individual selects a immobile TCK frequency the JTAG Manager module automatically
change booting pace to the immobile TCK too.
- immobile bug: if "Use End Address" and "AutoFull Flash Size" were checked there was error setting legal size to read.
- for Advanced Users: modern settings are today moved from the DCC Read/Write tender ("Notifications...") into removed fix on Box Service tender (Advanced Settings button)
- additional 5.0V USB Power On/Off controlling feature
For this go to Box Service page, utter Advanced Settings: the Notifications talking module be displayed,
go to "Advanced Settings" tender and ordered desirable fashion for "Enable 5.0V output" checkbox.
When enabled, 5.0V noesis module be on after some "JTAG" activeness executed and module rest "ON" until
box restart or until "Enable 5.0V output" checkbox is unchecked and some "JTAG" activeness is executed.
- additional improvement for experience module devices which are sector-based (like MDOC H3 or MMC/SD module cards)
- if error code 0x3C (write-protect) is conventional no recover attempts are made.
RIFF Box â€" JTAG Revolution
.
Posts
0 comments:
Post a Comment